Mechanical Services

Mechanical Deliverables

Below is what Avantis can offer for the Mechanical discipline:

  • List of drawings
  • Legend and notes
  • Layout plans
  • 3D modeling services (REVIT)
  • Installation detail
  • Schematic diagrams
  • Enlarged layouts (Technical areas, shaft details)
  • Calculation notes (Design briefs)
  • Load & heat dissipation calculations
  • Thermal modeling
  • Computational Fluid Dynamics (CFD)
  • Hydraulic calculations
  • Schedule of equipment
  • Specifications
  • Bill of quantities

    • Systems

    Plumbing Systems

  • Gravity/direct boosting domestic water
  • distribution
  • Centralized/decentralized hot water systems
  • Solar/steam hot water systems
  • Domestic water treatment station
  • Sanitary waste and vent
  • Storm drainage network
  • Grey water system
  • Sewage treatment plant
  • Medical gazes system (Compressed air, CO2, nitrogen, oxygen, argon, vacuum, helium, natural gas, nitrous oxide, waste anesthetic gas disposal)

    • Heating, Ventilation and Air Conditioning System - HVAC

  • Chilled water system (Water cooled chillers, air cooled chillers, primary and secondary closed loop system)
  • Variable Refrigerants Flow (VRF)
  • Variable Air Volume (VAV)
  • Air handling units, fan coil units (Two or four pipes system)
  • Energy recovery wheel system
  • DX-Split units systems
  • Under floor treatment systems
  • Totally fresh air cooling system
  • Low temperature/humidity system
  • Hot water boilers, steam boilers, heat exchangers

    • Fire Protection System

  • Design of sprinkler system
  • Design of fire suppression systems (FM 200, CO2, dry powder)
  • Stand pipe class-I (Landing valve)
  • Stand pipe class-II (Fire hose cabinet)
  • Stand pipe class-III (Combined system)
  • Smoke management system

    • Building Management System - BMS

  • Integration of different building utility systems into one platform that helps for a centralized monitoring and controlling of the distributed systems from one location
  • Understanding the client's and projects requirements for the BMS system
  • Identifying the design criteria
  • Generating the documents to capture the required BMS system
  • Developing the I/O list and network
  • Production of layouts details and schematic diagram